Job IDJob TitleJob TypeLocationJob posted on
AT255Construction Project ManagerFull TimeNYSeptember 6, 2019
AT254Manufacturing Process EngineerFull TimeVASeptember 6, 2019
AT253FPGA Firmware Design EngineerFull TimeOHJuly 31, 2019
AT252Systems EngineerFull TimeOHJuly 31, 2019
AT251Structural Engineer with SEFull TimePAJuly 31, 2019
AT250Aerospace EngineerFull TimeVAJuly 31, 2019
AT249R&D Engineer- Mechanical (Vibration Theory)Full TimeMOJuly 31, 2019
AT248CAD Interface & Support SpecialistFull TimePAJuly 31, 2019
AT247Civil Engineer – Site DevelopmentFull TimeTXJuly 31, 2019
AT246Project Manager- Oil and GasFull TimeMNJuly 31, 2019
AT245DIE CASTING SHIFT SUPERVISORFull TimeTNJuly 31, 2019
AT244Tooling TechnicianFull TimeTNJuly 31, 2019
AT243Civil Engineer (Land Development)Full TimeVAJuly 31, 2019
AT242Project ArchitectFull TimeNYJuly 31, 2019
AT241Reliability and Test EngineerFull TimeCAJuly 31, 2019

Job Title: Construction Project Manager

Employment Type: Full Time

Location: NY

Job Posted Date: September 6, 2019

This position requires the ability to prioritize and multitask, while being inquisitive, detail-oriented and focused on deadlines. The right candidate should be able to work independently, while still taking advantage of a team environment to complete tasks. This person must also be reliable and able to maintain a calm disposition under pressure.
Responsibilities
Oversee the project from start to finish
Oversee the change order process to ensure the extras presented to the owner get approved and are fair
Perform a key role in project planning, budgeting, and identification of resources needed.
Create the teams, develop the objectives/goals of each and assign individual responsibilities.
Project accounting functions including managing the budget, tracking of team expenses and minimizing exposure and risk in the project
Ensure that construction activities move according to predetermined schedule.
Communicate effectively with the contractors responsible for completing various phases of the project.
Co-ordinate the efforts of all parties involved in the project, which include the architects, consultants, contractors, sub-contractors and laborers.
Monitor the progress of the construction activities on a regular basis and hold regular status meetings with all the sub-teams.
Periodic inspection of construction sites.
Ensure project documents are complete.
Serve as a key link with the clients and review the deliverable prepared by the team before passing onto client.
Requirements
Bachelors degree in Construction
4 years work experience

Apply for the Job

Job Title: Manufacturing Process Engineer

Employment Type: Full Time

Location: VA

Job Posted Date: September 6, 2019

Essential Functions:
Carries out process and equipment reviews, corresponding improvements, problem resolution, project management and employee training
Improves manufacturing processes and methods for cost-reduction, quality improvement and efficiency
Prepares and presents plans for the above and coordinates deployment including training of team members
Assists general manager in improving a system of production control, standard operating procedures, safety, quality control and training
Performs research, design and development of manufacturing processes including production flow, assembly methods and production equipment
Prepares and maintains detailed layouts of buildings and equipment
Coordinates with Design Engineering to launch manufacturing to launch new/revised products including establishing goals, training team members and evaluating results
Designs, develops, cost justifies and tests various tools, machinery and equipment for recommended manufacturing methods
Performs product/process analysis for cost reduction, quality improvement, and improved efficiency
Represents manufacturing on cross-functional teams
Competencies:
Technical and Engineering Capacity
Process focused Problem Solving/Analysis
Leadership
Communication Proficiency
Required Work Experience
5 yrs. experience in process and or manufacturing engineering2-3 yrs. experience in design transfer from development to manufacturing
2-3 yrs. experience scoping and justifying new equipment for process improvement.
1-3 yrs. experience working in medical device manufacturing environment

Apply for the Job

Job Title: FPGA Firmware Design Engineer

Employment Type: Full Time

Location: OH

Job Posted Date: July 31, 2019

This will be an experienced FPGA/ASIC engineer who will design, architect, and implement waveforms and DSP algorithms using VHDL or Verilog targeting Software Defined Radio (SDR) hardware. Firmware development is applied to high complexity and high throughput implementations with a focus on VHDL, code re-use, fixed point modeling, low power design, system integration, test automation, FPGA/ASIC IP Core development and product test/support while leveraging advancements in SoCs, synthesis tools and SDR hardware. We are looking for individuals who have demonstrated ability in innovative thinking and versatility with experience in the following:

FPGA/ASIC architecture design, simulation and verification
MATLAB algorithm development
Previous Project Management experience
DSP Algorithms and RF Protocols
Machine learning skills (AI, TensorFlow, etc.)
Citizenship: U.S. Citizenship is required
Clearance Requirement: No, but would be a plus
Relocation Assistance: May be provided/negotiable

Apply for the Job

Job Title: Systems Engineer

Employment Type: Full Time

Location: OH

Job Posted Date: July 31, 2019

The Systems Engineer will develop system requirements, conduct systems-level analyses, study design and implementation trade-offs, and provide written design/test/analysis documentation and occasional oral presentations. In addition, the Systems Engineer will design and implement digital signal processing (DSP) algorithms that are conducive for implementation in software, firmware and hardware. Algorithm development will focus on the areas of advanced communication modem design, geolocation technologies, interference mitigation/cancellation, and advanced/adaptive signal processing. Design and implementations will address difficult scenarios with an emphasis on low signal to noise ratio, high interference, and advanced, adaptive modulation and coding techniques.

MATLAB/C/C++
DSP Algorithms and RF Protocols
SDR, Military waveforms
FPGAs Altera (Client)/Xilinx

Citizenship: U.S. Citizenship is required
Clearance Requirement: No, but would be a plus
Travel Requirements: Unlikely but may require overnight travel up to 10 % of the time
Relocation Assistance: May be provided/negotiable

Apply for the Job

Job Title: Structural Engineer with SE

Employment Type: Full Time

Location: PA

Job Posted Date: July 31, 2019

Job Description:
We are currently seeking a highly talented, professional engineer with excellent communication & interpersonal skills for the position of Project Engineer in our Blue Bell, PA (Philadelphia area) office.

Responsibilities:

Structural engineering on cast-in-place concrete, pre-cast concrete and steel structures.
Preparing engineering calculations, structural drawings, and details.
Performing construction administration services including shop drawing review and field visits.
Researching building and structural code issues.
Assisting Project Managers in managing all phases of complex structural design projects.
Mentoring junior engineers.

Requirements:
The ideal candidate is a professional engineer (P.E.) with SE license
Bachelor’s or Masters of Science in Civil Engineering or Architectural Engineering
7+ years of experience in all phases of complex structural design projects.
Experience with multi-level parking or other mixed-use commercial structures is preferred.
All candidates must have a strong working knowledge of AutoCAD, Revit and ETABS. Proficiency with ADAPT.

Experience:
complex structural design projects: 7 years (Required)
AutoCAD, Revit and ETABS: 1 year (Required)
mixed-use commercial structures: 1 year (Preferred)

Education:

Bachelor’s (Required)

License:

SE license (Required)

Apply for the Job

Job Title: Aerospace Engineer

Employment Type: Full Time

Location: VA

Job Posted Date: July 31, 2019

Job Description :
Aerospace Engineer who possesses a strong background in analysis-of systems ideally military ground systems. The successful candidate will conduct analyses or advanced technologies to support scientific and technical assessments of military ground forces research, systems, and operations.

JOB RESPONSIBILITIES:
Provide all-source assessments, responding to requests for information, entering data into databases, and contributing to Government products such as briefings, assessments, and reports.

REQUIRED QUALIFICATIONS:
Bachelors in Mechanical, Aerospace, or Aeronautical Engineering with at least three years of experience
Must currently possess a DoD TS/SCI clearance
Experience analyzing capabilities of unmanned aerial vehicles (UAVs) and helicopter materials and structures
Experience in modeling techniques for determining aerodynamic performance
Proficient in computer-aided design (CAD)

DESIRED QUALIFICATIONS:
Masters or PhD in Mechanical, Aerospace, or Aeronautical Engineering with two years of experience
Experience reviewing and assessing military ground technologies
Experience with all-source assessments for intelligence agencies

Education:
Bachelor’s (Preferred)

License:
Dept. of Defense TS/SCI clearance (Preferred)
Work authorization:
United States (Required)

Work Location:
One location

Benefits:
Health insurance
Dental insurance
Vision insurance
Retirement plan
Paid time off

Apply for the Job

Job Title: R&D Engineer- Mechanical (Vibration Theory)

Employment Type: Full Time

Location: MO

Job Posted Date: July 31, 2019

Job Description:

This position is a member of the engineering team responsible for the development of innovative, industry-leading wheel balancing machines for use in the automotive service industry. This position will be responsible for taking machine design projects from conception through production release.

Responsibilities:

· Creative and innovative new product research & development.
· Develop wheel balancing and vibration reduction technology to ensure that Hunter Engineering remains the technology leader in this segment.
· Validate machine design through analysis and testing as well as designing test fixtures and special instrumentation where necessary.

Desired Skills and Experience:

Qualifications:

· A bachelor’s degree in Mechanical Engineering is required.
· 10+ years vibration theory and analysis.
· Design and development of balancing machines.
· Development of sensor calibration schemes and algorithms.
· Proactive decision maker with a strong sense of creativity.
· Must thrive in a team environment.
· Electro/mechanical sensor design experience.
· System control theory experience.

Apply for the Job

Job Title: CAD Interface & Support Specialist

Employment Type: Full Time

Location: PA

Job Posted Date: July 31, 2019

Requirements:
A 5-8 years experienced mechanical engineer with an Expert Level CAD experience in ProE- Creo 2/ Creo 3/Creo 4 CAD environment.
Strong aptitude to improve the process and methods as applicable to CAD.
Prior experience having worked in organizations having strong CAD Global guidelines and standards covering modeling and detailing.
Strong interpersonal skills required and must have supported or trained engineers in CAD
Strong time management and project management skills.
Prior experience in PLM (Teamcenter preferred).
Able to be self-directed & proactive with minimal supervision with periodic status reporting
Experience with basic Microsoft Office programs (Word, Excel, and Power Point)
Ability to work under pressure and manage multiple tasks

Roles and Responsibility:
Support Design engineers in using the CAD environment effectively and efficiently.
Conduct/facilitate user group meetings to understand enhancement requirements, while prioritizing.
Work in close conjunction with business leaders, processes and tool development methods while providing detailed documentation.
Participate in developing used cases and detailed test specification from the end user perspective while tool development/improvement is in progress.
Conduct user acceptance tests before the roll out of newer features in CAD.
Participate in documentation of issue /problems and support resolution requirements.
Team participation in signing off on newer CAD development introduction to design engineers.
Periodic training of engineers on CAD usage, practices and standards.

Apply for the Job

Job Title: Civil Engineer – Site Development

Employment Type: Full Time

Location: TX

Job Posted Date: July 31, 2019

Description
Summary of Role

Provides design services for support of projects that involve Substation Engineering and Transmission Engineering for High Voltage Electric facilities. The position reports to the Supervisor of Civil/Site Development Engineering. The position interfaces with other discipline project leads, client engineering and construction managers, surveying and geotechnical engineering vendors, equipment and structure vendors.

Duties & Responsibilities

Employee may be called upon to perform any or all of the following functions:
· Work with project team to create or modify all civil site development design documents
· Use project specific standards and ensure that the design efforts are progressing in the most efficient manner possible
· Develop detail site development drawings
· Apply engineering application software for the design of site grading, drainage and site surveys
· Perform engineering and design functions a necessary to meet project schedules
· Communicate and coordinate project activities with customer representatives, project team, and management
· Ensure correct application of engineering standards including the NESC, IEEE, ANSI, AISC and ACI
· Properly use the document management system
· Take personal responsibility for the quality and accuracy of his/her work
· Other duties as required

Minimum Qualifications/Experience
Bachelor degree in Civil Engineering from an accredited university, or equivalent degree with experience in the Civil Engineering field, is required.
Candidates must be a licensed professional engineer, or must be able to obtain licensure within two years of hire. If registered in a state other than where the engineer will practice, the individual must be able to obtain a license for the state of Texas within one year of date of hire.
A minimum of three years of direct experience and proven knowledge in civil site development design is required.

Possess skills in the following areas:
· The ideal candidate has experience with site design, grading, drainage, stormwater, land easements, surveying and earthwork as may be found in greenfield or expansion of existing electric substations or other similar type facilities
· Knowledge and understanding of soil erosion and sediment control, stormwater modeling, permitting, pavement design and specifications, as well as knowledge and understanding of electrical substation and transmission line components and their functions
· Proficient and having strong knowledge of common engineering application software; Experience with AutoCAD Civil 3D, Bentley MicroStation 3D, Pondpack and associated design tools is preferred
· Extensive knowledge and understanding of engineering standards including NESC, IEEE, ANSI, AISC and ACI
· Extensive knowledge of site / civil design documents and drawings necessary to complete an electrical substation project
· Knowledge of common word processing, excel spreadsheets, and e-mail software
· Working in a team environment
· Communicating effectively with co-workers, vendors, clients, etc.

The Company provides life insurance, accidental death and dismemberment insurance, long term disability and an employee assistance plan at no cost to the employee. Benefit offerings also include a choice of traditional PPO or one of two HDHPs, with corresponding FSA or HSA, dental, vision, supplemental life insurance, short-term disability insurance, critical illness insurance, group accident insurance, hospital indemnity insurance, a 401(k) with immediate vesting and more!

Apply for the Job

Job Title: Project Manager- Oil and Gas

Employment Type: Full Time

Location: MN

Job Posted Date: July 31, 2019

Basic Function
Owner of revenue driven projects from the point of project award to completion. Manage project execution to ensure adherence to budget, schedule, scope, profitability and customer satisfaction.
Duties & Responsibilities
• Work with all necessary departments to create an overall plan for the project identifying key delivery milestones to both internal and external shareholders.
• Work with the client, engineering, planning, procurement, production, and quality control in the planning and execution of the project plan.
• Fully understand contract deliverables to the customer including product delivery, documentation requirements, monthly schedule updates, payment milestones, quality control, inspections and delivery terms.
• Escalate issues to appropriate department/level of management based on circumstances to ensure the goals of the project are being met.
• Track project scope changes/back charges and other changes that affect the profitability of the project.
• Complete Monthly Updates to the customer, Bi-weekly updates to internal shareholders, and Weekly updates to the team as required to ensure the success of the project.
• Understand and comply with all HSE, Compliance and other Company Policies.
• Must know Quality Policy and comply with all requirements of the Quality System Manual, Operating and technical procedures and work instructions as it applies to the position.
• Perform various other duties as assigned by the supervisor within the physical constraints of the job.

Required Skills
• Degree in Mechanical Engineering or Manufacturing Engineering
• 3-5 years’ experience in a manufacturing environment
• 3+ years’ experience as a project manager with a record of successful projects
• PMP certification highly desired
• Ability to read engineering/production drawings with a high emphasis on welding construction of mechanical assemblies.
• Ability to read client detailed specifications, identify applicable and non-applicable points, then translate requirement into actions.
• Ability to view multiple steps in advance of the project, creating a path for the project success.
• Full understanding of the cost/benefits of decisions to support both the success of the project and the overall objects of the business unit and company.
• High ability to influence personnel and departments to achieve overall goals of the project.
• Ability to communicate and cooperate effectively on cross-functional teams.
• Detailed driven to find root causes of problems within the project and develop the appropriate solutions.·
• Ability to provide concise insights to project status, upcoming milestones and expected results.·
• Must be a self-starter, innovative and able to work independently as well as in teams to solve problems ·
• Understanding of mechanical design, mechanical drawing standards to define fabrication processes experience reviewing manufacturing processes and to identify problems and improvement opportunities ·
• Ability to prepare cost and labor estimates as well as business cases for investing in capital equipment ·
• PC skills including MS Office, MS Project, and SAP

Benefits
• Medical/Dental/Vision – Family Coverage Available
• Safe Harbor 401(k) – 5% Employer Match
• Group Term Life Insurance – Additional Coverage Available
• 10 Paid Holidays per Year
• Sick Time & Vacation Time
• Short & Long Term Disability Insurance
• Critical Illness Insurance
• Employee Assistance Program (EAP)
• Optional Legal Plan

Apply for the Job

Job Title: DIE CASTING SHIFT SUPERVISOR

Employment Type: Full Time

Location: TN

Job Posted Date: July 31, 2019

1. MISSION:
• Reach the established production and quality objectives for the shits assigned, by applying and efficient organization and distribution of the work between a production team formed by several workers.
• GENERAL FUNCTIONS*:
• Prepare equipment and work places and assign the operators to the different job positions depending on their technical knowledge and skills.
• Distribute and monitor the team work, as well as to provide the necessary support for the correction of possible deviations.
• Train/coach new team leader/operate if Team Leader does not exist in the area/make layer out flash audit.
• Watch over the fulfilment of the Labour Health and Safety policies in its responsibility area.
• Control and supervise the optimum performance of people, work places and equipments, as well as control skill matrix (polyvalence)
• Fill in the plant required documentation for production, quality, presence, etc.
• Monitor the achievement of the quality standards settle for processes and products.
• Report the Section Manager about the main effectiveness and efficiency ratios of its supervised area.
• Ensure an appropriate administration and us of the consumption materials.
• Participate in pre-shifting meetings and daily production meetings.
• Provide his/her team with the necessary means to comply with Health & Safety and Environment rules and assure they are properly used.
• Actively cooperate with the Department in the maintenance, promotion and improvement of Occupational Safety and Health (OSH) and Environment and Quality Department.
(*)
The described functions are only the most representative for this position; therefore, they should not be understood as all the inherent functions related to this job position.

2. POSITION REQUIREMENTS (EDUCATION & LANGUAGUES & EXPERTISE)
Academic background: Elementary, Secondary or Vocational training.
Additional training: Basic training in health and safety, fork lift certification, strong mechanical skills. Training required but not limited to: Fire Drill, Tornado Drill, SDS, ENV Awareness, HazCom, Annual Safety, Hazwoper.
Languages: N/A

Minimum Experience required: Quality, safety, people management and product techniques. Basic training in health and safety, and environmental management.

3. OTHER REQUIREMENTS: 2 years in a similar position

4. PROFESSIONAL CLASSIFICATION: Supervisor

Apply for the Job

Job Title: Tooling Technician

Employment Type: Full Time

Location: TN

Job Posted Date: July 31, 2019

MISSION:

• Collaborate to achieve the objectives of the projects in terms of investment cost, parts and tools quality and cycle times of the injection toolings. Give support to Desing Engineering to ensure best possible performance of the tools and products.

*GENERAL FUNCTIONS:

• Assist to Front Loads workshops and ensure the correct strategy and design for the injection toolings.
• Manage mold flow analysis and assure PDD support to Engineering Department.
• Participate in the all related product design phases to check impacts on the tooling (DPR2 & 3).
• Define mold concept & technical requirements (RFQ).
• Adapt timing for the molds to the FDS and customer milestones.
• Validate mold drawings according to RFQ, QSTD and injection process of the production Plant.
• Make mold construction follow up (timing, cost and quality). Report to the team.
• Assist to most important trials for a project success (follow std DS & HS phases).
• Manage with team & suppliers the modifications to be done.
• Validate molds before the run@rate.
• Management of problems with molds in production.
• Update Tooling Data Base with the required information.
• Audit B and C suppliers of his country´s panel.
• Give support to KAM in quotations for customers.
• Observe company’s Code of Ethics to avoid fraudulent practices. Comply with Information Security Management System (ISMS) applicable to the job, along with the training related thereto.
• Actively cooperate in maintaining, promoting and improving the OHSE and Quality department and Quality Department.

Apply for the Job

Job Title: Civil Engineer (Land Development)

Employment Type: Full Time

Location: VA

Job Posted Date: July 31, 2019

Job Description:
The position is for a production-level Civil Engineer, Civil Engineering Technician, or graduate from a Civil Engineering Technology program. Extensive knowledge of AutoCAD Civil3D 2017 (or newer) is required.
The Engineer that fulfills this position will be an in-house resource for Engineering plan production which will require involvement in resolving the many technical challenges associated with a variety of projects. This individual will obtain significant mentorship, guidance, and on-the-job training relative to all facets of municipal, residential, and commercial land improvement. More critical than the particular discipline of collegiate engineering study is the candidate’s ability to problem-solve, work independently, evaluate various conditions efficiently and effectively, and demonstrate a common-sense approach to design.
At least 2 years of relevant experience (work with land development plans such as, residential subdivisions, commercial developments, roadway projects, plats, surveys, and the elements associated with these types of plans) is required.

Required Qualifications:
• Extensive knowledge and proficiency in current release of AutoCAD Civil3D
• Possess a sound knowledge of engineering fundamentals
• Exceptional oral and written communication skills
• Capacity to solve technical problems with innovative and economical solutions
• Highly motivated, independently productive, and willing to take on new challenges

Preferred Qualifications:

• BS in Engineering/Engineering Technology
• Obtained, or ability to obtain, Engineer-In-Training (EIT) designation
• Knowledge and capability in the field of Land Surveying
• Participation in professional societies and extracurricular activities
• Applicable internship experience and/or work experience
Experience:
• relevant: 2 years (Required)
• AutoCAD Civil 3D: 2 years (Required)

Benefits:

• Health insurance
• Dental insurance
• Retirement plan
• Paid time off
• Professional development assistance
• Tuition reimbursement

Apply for the Job

Job Title: Project Architect

Employment Type: Full Time

Location: NY

Job Posted Date: July 31, 2019

Job Description:
An Excellent Opportunity for an Architectural Design Project Architect.
Our client a highly reputable multi-discipline engineering and architectural firm in the Northeast, is seeking to fill a position within our Architecture Services Division, in our Latham (Albany) NY headquarters. Unlimited potential exists for the right candidate, including transitioning to management positions and ownership opportunities.
Join us during this exciting growth period as our company fulfills its strategic objectives and creates rewarding opportunities for its entire staff. If your background and skill set include the following, we encourage you to apply:

• Bachelor of Architecture, or another qualified path to licensure, with 5 years related experience, working towards registration as an architect in New York State.
• NCARB certified a plus.
• Broad-ranging portfolio of project experience, including commercial, municipal, and public works project types.
• Strong working knowledge of building systems and coordination with other disciplines.
• Must be production proficient in the current version of AutoCAD and AIA MasterSpec specifications. Knowledge of REVIT is a plus.
• We offer exciting, challenging and diverse projects in a high-energy team setting with like-minded professionals.

Apply for the Job

Job Title: Reliability and Test Engineer

Employment Type: Full Time

Location: CA

Job Posted Date: July 31, 2019

Job Description
Our client is in San Leandro-based drone start-up, is looking for an experienced Reliability and Test engineer to further improve their quality efforts. You will be working on the first flying camera with broad approval from the FAA for commercial operations over people as well as next generation drones for Ford and the Armyb. You will be responsible for working with our manufacturing partners and local team to improve quality and manage quality related documentation.

Responsibilities
• Develop and implement testing and reliability processes
• Determine EE related changes needed at component, PCB and assembly level for reliability and quality
• Drive quality methodologies that prevent customer issues and form a proactive approach to the quality culture
• Ensure compliance with all related policies and procedures
• Implement quality improvement and assurance processes and procedures
• Be the quality interface between company and its manufacturing partners

Skills and Qualifications
• Degree in Electrical Engineering required
• Experience troubleshooting electronics on board level
• Experience with PCB design and fabrication
• Work experience in an ISO certified industrial setting preferred.
• Experience with quality systems and quality assurance in a manufacturing setting
• Previous experience with ISO audits
• Ability to create strategies, define and articulate clear role expectations and direction
• Willingness to “do what it takes,” including direct auditing activities at times

Compensation
You can expect competitive startup salary, generous equity, a satisfying and fast-paced work environment, and a product you will be proud to be involved with.

Apply for the Job